PDA

View Full Version : Is a light meter worth it



BuDWiZe
05-01-2011, 4:35pm
So i seen some videos recently for strobing and almsot all of these guys used light meters
so i checked out a sekonic l-758dr for $569 US at b&H which is a fair bit which is what i saw 2 of them using

so my main question is for strobing indoors and out is it better to use these instead of the on camera meter?

jjphoto
05-01-2011, 4:52pm
A meter is not very useful for balancing lighting, at least not as useful as actually chimping which gives you a fairly faithful representaion of ratios. I don't bother using meters, and I have plenty of them (even with the wiz-bang Pocket Wizard radio triggers built in), simply because it's easier to chimp, although this seems to be too low brow for some to cope with. You really won't be any more professional, creative, efficient etc etc with a meter.

If all you are doing is shooting indoors with strobes then a meter is potentially quite handy because you can quickly reposition a light and check it's intensity with the meter. Especially if you've found a way you like to work, ie aperture/shutter speeds that you like to use so you can set the lights to suit. I think they are potentially fine in that scenario. But I still prefer to chimp because I would do that anyway so I'm just eliminating a step!

I use strobes outdoors almost all the time, both balanced with other lighting and as the entire light source, and I don't bother to bring any meters, ever. It's more of a hassle than it's worth.

JJ

kiwi
05-01-2011, 5:45pm
what he said

Shelley
16-01-2011, 10:08pm
I don't always use the light meter, but I am starting to use it more. I find it helps me get the correct reading quickly and understand the lighting for my studio set ups. I am fairly new at it and maybe as I get more experience I will not require it. I don't use it when birding.

Starting to do fill flash more for portraits outside and I have found the light meter invaluable in helping me get it right, again new for me. I have to get good as I am moving in to people stuff - and they are quite different to the birds.

I use the sekonic L358 - decided it was good enough for what I wanted.

maccaroneski
16-01-2011, 10:10pm
I don't think it's necessary, but I DO think that it can make you more efficient in the studio.

Want to set the background to blow out at a stop above your scene? Easily done with a meter. Several test shots required without.

BuDWiZe
16-01-2011, 10:13pm
i ended up buying 1 and it has saved me alot of time actually . i havent always used it and have only used it with the strobes it did make it quicker and easier and i was able to set background to a different stop quickly whre i was taking a bit of time trying to chimp it on the screen i think over time with use i will start to have figures in my head and wont/rarely need it at some point

snat56
02-02-2011, 8:43pm
Chimping???

kiwi
02-02-2011, 8:48pm
Chimping is checking the image on the back of the LCD after each shot

Usually done by chimpers

Wobbles
03-02-2011, 12:17pm
Chimping???

I read somewhere that the term comes from - a photog hunched over his lcd and uttering "ooh ooh" noises having spotted a keeper! :D

Longshots
04-02-2011, 7:26pm
A meter is not very useful for balancing lighting, at least not as useful as actually chimping which gives you a fairly faithful representaion of ratios. I don't bother using meters, and I have plenty of them (even with the wiz-bang Pocket Wizard radio triggers built in), simply because it's easier to chimp, although this seems to be too low brow for some to cope with. You really won't be any more professional, creative, efficient etc etc with a meter.

If all you are doing is shooting indoors with strobes then a meter is potentially quite handy because you can quickly reposition a light and check it's intensity with the meter. Especially if you've found a way you like to work, ie aperture/shutter speeds that you like to use so you can set the lights to suit. I think they are potentially fine in that scenario. But I still prefer to chimp because I would do that anyway so I'm just eliminating a step!

I use strobes outdoors almost all the time, both balanced with other lighting and as the entire light source, and I don't bother to bring any meters, ever. It's more of a hassle than it's worth.

JJ

While I can understand why someone cant be bothered using one, to say that they're not useful is nothing but delusional.

Even after all these years I still cant accurately gauge between a 1/4 of stop difference and a 1/3 of a stop difference - and chimping on the back of your screen isnt going to tell you the difference either. Yep fair call if you dont choose to use one, but saying a light meter is not useful is hugely misleading.

jjphoto
04-02-2011, 8:38pm
While I can understand why someone cant be bothered using one, to say that they're not useful is nothing but delusional.

Even after all these years I still cant accurately gauge between a 1/4 of stop difference and a 1/3 of a stop difference - and chimping on the back of your screen isnt going to tell you the difference either. Yep fair call if you dont choose to use one, but saying a light meter is not useful is hugely misleading.

Who's misleading and delusional?

If you'd actually read my post you would have noticed that I never said "that they're not useful", these are your words. I also explained the circumstances where they are potentially useful although it was really just one example.

It seems you don't really understand why some one wouldn't use a meter otherwsie why would you choose to twist my preference to not use a meter into laziness?

JJ

Wayne
04-02-2011, 9:09pm
I have the L-358 with PW module and while I agree you can get away without using it, the meter does make getting multiple light setup sorted much faster. I find it useful if mixing speedlight and the Rangers with sunlight. Again cn be done by chimping for most requirements, but models and clients get a bit annoyed when you spend too long and have to take several shots each time you change the lighting positions, aperture etc and that can make it look like you don't know what you are doing.

Dan Gamble
04-02-2011, 10:32pm
and chimping on the back of your screen isnt going to tell you the difference either.

Not even if you're chimping with a histogram view? Just wondering if that'd make a difference.

Dan Gamble
04-02-2011, 10:34pm
I have the L-358 with PW module and while I agree you can get away without using it, the meter does make getting multiple light setup sorted much faster. I find it useful if mixing speedlight and the Rangers with sunlight. Again cn be done by chimping for most requirements, but models and clients get a bit annoyed when you spend too long and have to take several shots each time you change the lighting positions, aperture etc and that can make it look like you don't know what you are doing.

I'd always envisaged shooting tests before the model came into play... But i'm now supposing that's not always practical. Is that what you mean?

Wayne
05-02-2011, 12:14am
What I mean Dan is when you have the model ready to go, and you may setup your first set of shots without meter prior to model arriving, but when you move location, position of lights, model, the light is fast changing around sunrise/sunset or changing lenses etc then the meter can be a time saver especially in multiple light setups.

Longshots
05-02-2011, 7:56am
Who's misleading and delusional?

If you'd actually read my post you would have noticed that I never said "that they're not useful", these are your words. I also explained the circumstances where they are potentially useful although it was really just one example.

It seems you don't really understand why some one wouldn't use a meter otherwsie why would you choose to twist my preference to not use a meter into laziness?

JJ

I did actually read your post, and here is where we have a point of difference - you said this:



A meter is not very useful for balancing lighting, at least not as useful as actually chimping which gives you a fairly faithful representaion of ratios. I don't bother using meters, and I have plenty of them (even with the wiz-bang Pocket Wizard radio triggers built in), simply because it's easier to chimp, although this seems to be too low brow for some to cope with. You really won't be any more professional, creative, efficient etc etc with a meter.

If all you are doing is shooting indoors with strobes then a meter is potentially quite handy because you can quickly reposition a light and check it's intensity with the meter. Especially if you've found a way you like to work, ie aperture/shutter speeds that you like to use so you can set the lights to suit. I think they are potentially fine in that scenario. But I still prefer to chimp because I would do that anyway so I'm just eliminating a step!

I use strobes outdoors almost all the time, both balanced with other lighting and as the entire light source, and I don't bother to bring any meters, ever. It's more of a hassle than it's worth.

JJ



I'm didnt cut anything out because I dont want to be accused of misquoting you.

But referring to your opening statement in your first paragraph you say:


A meter is not very useful for balancing lighting, at least not as useful as actually chimping which gives you a fairly faithful representaion of ratios. I don't bother using meters, and I have plenty of them (even with the wiz-bang Pocket Wizard radio triggers built in), simply because it's easier to chimp, although this seems to be too low brow for some to cope with. You really won't be any more professional, creative, efficient etc etc with a meter.


Not very useful - not as useful as chimping ?


I'm happy to not use one from time to time. I didnt meant to imply that I or anyone else was being lazy. Not my intention at all. :) But to answer the question, a meter is definitely useful

Recall that the question was "is a light meter worth it ? :) ".

I did say that
while I could understand why someone couldnt be bothered to use one, but please note that I didnt say it was laziness - my reference was to those experienced enough to simply judge, albeit relying on an average style of light.

I did say that I thought (and maintain that thought) you were delusional if you think you can tell the difference between 1/3rd of stop, and a 1/4 of stop difference between the light, inside or outside, strobe or ambient, because it cant be done. I'm afraid that chimping simply isnt going to tell you that information. Thats why I think your point is misleading.

What may look blown, may be blown out and non recoverable, you simply could not tell the subtle difference between a stop over , and a stop and half or a stop and a third. Using a meter and clearly demonstrates that you can control the subtle highlights and the shadows, which even the best preview (and please remember that you're previewing a low res jpeg for the preview) screen isnt going to be able to demonstrate. Know what they are, then you'll be way ahead. That subtlety is what makes using a meter "worth it". :cool:

BTW seen your work, and I'd congratulate you on some very nice auto images :) Clearly you have experience and skill, but if I wanted to help someone get to a similar level, I would definitely suggest that unless they can judge moving lights around, balancing them with ambient and then producing an image with a exposure range that needs little post work, then again supports a good reason to at least start using a meter, and eventually get to a level that you dont need to use it :) I know plenty of experienced photographers who cant be bothered (doesnt mean lazy) to use their meters, but thats only because they're experienced enough by that point.

Longshots
05-02-2011, 8:32am
Not even if you're chimping with a histogram view? Just wondering if that'd make a difference.

If you're only worried about the average, then a histogram is going to help, because thats all a histogram is going to be able to demonstrate - what the range throughout the image is going to show, not how much the highlight on say the back of someone's head is going to be, or how dark the shadow is at the bottom of an image.

Dan Gamble
05-02-2011, 10:00am
If you're only worried about the average, then a histogram is going to help, because thats all a histogram is going to be able to demonstrate - what the range throughout the image is going to show, not how much the highlight on say the back of someone's head is going to be, or how dark the shadow is at the bottom of an image.

In Live View I can see my live histogram. I set it to indicate brightness (other option is RGB) and when I move my cursor around the scene the histogram updates with the levels exposed to that area. I'm not trying to be argumentative but this seems to me to achieve a similar outcome to what you would with a light meter. No?

I mean we're talking about a quick levels setting in the heat of the moment.

I @ M
05-02-2011, 12:06pm
In Live View I can see my live histogram. I set it to indicate brightness (other option is RGB) and when I move my cursor around the scene the histogram updates with the levels exposed to that area. I'm not trying to be argumentative but this seems to me to achieve a similar outcome to what you would with a light meter. No?

Well --- if we are trying to set a ratio over 2, 3, 4 or more lights I would imagine that turning 1 light on and then taking a picture to examine the histogram, turning that light off and another on and taking a picture to examine the histogram -- ad infinitum till all the lights are "tested" would be a lot more time consuming and a lot less accurate than simply turning lights on and off and measuring the outputs accurately with a meter.
I am in the "use a lightmeter" camp on this issue.


I mean we're talking about a quick levels setting in the heat of the moment.

Mostly carefully set up and planned shots don't involve decisions made in the heat of the moment.

Longshots
06-02-2011, 6:33am
As it happens :) This weekend I'm presenting some studio lighting workshops.

I was doing a one on one teaching session yesterday with someone who believed - quite passionately - that they could use the histogram to check their exposures while using strobes/flash.

I demonstrated that by taking two readings (this was using studio flash), I had the highlight and shadow readings, twice as fast as they could accomplish taking a shot, and reviewing the histogram.

And in response to the point about live view and moving the cursor around - that would also take considerably more time then simply using a meter.

A few minutes of using and not using a light/flash meter, clearly demonstrated the usefulness of a meter. I'm pretty confident that my enlightened friend will post his opinion here very soon :)

And to go back to the OP's question - the in camera meter is going to utterly useless for manually measuring the light from a flash/strobe.

And again sorry, but a histogram is just not going to tell you subtle differences between 1/3 and 1/2 stops. Each time you change the settings of one, then 2, 3, 4 and more lights, to take a shot each time, reviewing the shot, reviewing a histogram is soooooooo slow.

I can absolutely assure you that in the "heat of the moment" I can take a reading and set my camera for the first correct shot, faster than someone guessing, taking the shot, reviewing the shot, and checking the histogram.

A meter does make it faster, and it gives you great control.

jasevk
06-02-2011, 1:32pm
As I'm now enlightened, I must say that I'm a light meter convert.

While I'm able to 'chimp' my way along, William was able to demonstrate just how fast it was to measure exposure for the highlights and shadows, then balance with ambient light. Considerably faster than i was able to 'chimp' over the line.

And that's not to mention the fact that if you have a model who's either being paid, or paying for the session, to me nothing looks more amateurish than the photographer fumbling around the back of a camera.

So I'll be buying a light meter this week I think, it just makes everything so darn easy...

Longshots
06-02-2011, 6:45pm
Amd thats what my point is. not trying to prove anyone is right or wrong, but simply what works and what is "useful".

maccaroneski
10-02-2011, 8:02pm
I've been wanting to buy one for a while. Anyone want to save me the research and fuel my laziness with a recommendation?

jasevk
10-02-2011, 8:18pm
The Sekonic L-758DR is a pretty amazing piece of gear! You can calibrate it to your camera/lens combination, and it has a built in wireless trigger compatible with pocket wizard :)

viscountvics
10-02-2011, 11:13pm
how would I use light meter if i'm only using small strobes? I usually trigger my flashes using the Nikon internal commander mode.

do you think the light meter can trigger my flashes? (sb-600 and sb-900)

thanks for the awesome tips so far :)

Darey
10-02-2011, 11:27pm
Hey Tony,
I have a Seconic L358 and I think it is well worth having, you are welcome to try it any time.
Pop in on the way home from work and have a nice espresso when you pick it up.

jasevk
11-02-2011, 5:46am
Hey Tony,
I have a Seconic L358 and I think it is well worth having, you are welcome to try it any time.
Pop in on the way home from work and have a nice espresso when you pick it up.

There you go Tony... How can you knock that back?? ;)

jasevk
11-02-2011, 5:49am
do you think the light meter can trigger my flashes? (sb-600 and sb-900)



The light meters have a sync cord jack, you could hook up to your master unit, or try using a cheap wireless triggering system like the cactus IV, plugging the trigger into the light meter via a small sync cord may work?

ricktas
11-02-2011, 6:10am
Some light meters can also be set for studio and will take a reading from the 'flash' as well. Mine sits there waiting and when the flash occurs it takes the reading. Nice and easy.

ricktas
11-02-2011, 6:22am
how would I use light meter if i'm only using small strobes? I usually trigger my flashes using the Nikon internal commander mode.

do you think the light meter can trigger my flashes? (sb-600 and sb-900)

thanks for the awesome tips so far :)

Huh? You ask this when your website describes you "professional photographer currently based in Melbourne, Australia. I am specializing in fashion and portrait photography." If you do not know the answer to this already, I would be very surprised, as I would think any fashion photographer would need to be very able in the use of lighting.

jasevk
11-02-2011, 9:25am
Huh? You ask this when your website describes you "professional photographer currently based in Melbourne, Australia. I am specializing in fashion and portrait photography." If you do not know the answer to this already, I would be very surprised, as I would think any fashion photographer would need to be very able in the use of lighting.

Well, perhaps he has mastered the process of 'chimping' we've been discussing? If so, I don't see why being a professional means he should be already proficient in the use of a light meter. The discussion above demonstrates that there are a couple of options to managing studio lights, with the conclusion being that use of a light meter is a more efficient way to balance flash and ambient light... but not necessarily the only correct method.

Geoff
13-03-2011, 12:25am
I was sceptical for the longest while, but when consistancy is the key I've discovered (the hard way) that a light meter is essential.

I use mine primarily in studio to set a ratio and exposure on key, fill and background lights quickly. Also use it to measure light consistancy across full length portraits (lookbooks typically) - if it's important to have even lighting then it is a big help.

If I'm outdoors, I chimp away. If I'm shooting a personal project that isn't a set of images (i.e. I'm playing around with lighting ideas) then I usually just chimp and note what I think worked.

BuDWiZe
13-03-2011, 8:08am
after talking to a professional photographer by the name of frank doorhof i went and got a sekonic and im really glad i did it amade things quick adn easy for me. now i just set up, click the meter, get a reading, adjust setting on the ranger r if i need to and start shooting so im happy and it makes things spot on accurate

JayR
15-03-2011, 11:35pm
given im doing portable studio sessions with multiple flashes and balancing with other lighting, i definitely like using a meter to at least begin with.
Shooting in RAW also seems a little more forgiving though.

Brodie
22-03-2011, 12:59pm
It's an interesting topic, I think it just comes down to personal preference now. Works better for some than others, and it can depend on what you're shooting. If you cant afford one though, i wouldnt be worried about one.

I wrote a little article why I dont use one, and included a couple links to other professionals who have written short articles on the topic as well. They are worth a read. Find it HERE (http://www.brodiebutler.com/blog/2011/03/reasons-why-i-dont-use-a-light-meter-for-flash-photography/).