PDA

View Full Version : Remote shutter release



creativepro
02-10-2010, 12:45am
i have a Nikon D700. Just purchased a wired remote control for the camera.

Do I need to set-up this within the menus for the remote to work?
If so please advise in which menu.

thanks


Sue

Lani
02-10-2010, 7:56am
Hi Sue,
No, just connect into the port on the front, under the rubber covering, turn it on and it should be good to go.

creativepro
05-10-2010, 2:57am
Thanks for your response.
The remote release was still a problem I took the camera and remote release cord to a camera shop. The connecting prongs of the remote has been damaged. Unable to be used

However when I had the Nikon D80 somebody gave me a Nikon infrared remote.

As this does not work on its own there must be somewhere within the Nikon D 7000 menu to set this up.Could you advise?

thank you

Sue

Wayne
05-10-2010, 4:01am
I assume you mean a D700, not the D7000 you mentioned in your previous post? If so;

There is nowhere to setup in the menu a remote release.

You simply plug a wired one into the 10 pin connector on the front left side where the 2 rubber caps are, and for a wireless release, you plug the receiver into the same 10 pin socket, and the transmitter obviously is in your hand, no menu setup at all.

I @ M
05-10-2010, 5:29am
Sue, the infra red remote DOES NOT work with the D700.

It was only ever made for the D50 - 80 series.

Cable remotes ( 10 pin ) can be sourced very cheaply from many shops as Chinese made Nikon knock offs.