PDA

View Full Version : Exposure, Expose to the Right, Grad filters, HDR etc - discussion



Kym
11-05-2010, 10:21am
We hear the advice 'expose to the right' or 'expose for the highlights' which to some extent contradict each other.

This is always an interesting discussion and I'm sure members have lots of opinions. :D

This article (http://photofocus.com/2009/08/29/expose-to-the-right/)explains expose to the right.

The article says don't let the histogram bump up against the RHS which will lead to blown highlights.

So to me setting +/-Ev (or whatever you do in manual) is about getting the right exposure for the conditions.
Blown highlights are the worst problem ONLY IF they have detail you actually wanted.
Eg: a shot of a car with lots of chrome will have some blown bits - no drama; but
a photo of a 'blond beach babe' where the models hair is blown is not so good.

In the end "Expose to the right if you can" makes more sense to me.

The solution for getting a good exposure may well be HDR (multi exposure) and/or grad filters,
but these options are not always available.

You may get less noise when you slightly over expose, but a slight under exposure (to the left) means you save those highlights.
Which is right? To me it depends on the subject and what you trying to capture.

So please share your thoughts about exposing for landscapes and sunsets, sports, wildlife etc. :th3:

kiwi
11-05-2010, 10:25am
ECFTAYDNTFAIP

Expose Correctly First Time And You Dont Need To Fart Around In Post

ricktas
11-05-2010, 10:37am
Always expose so that highlights are not blown. Any highlights blown out to pure white cannot be recovered in editing software. Luckily though, shadows can, even with a simple use of the shadows/highlights sliders. So expose your photos so that the whitest, brightest parts are not pure white (learn to use your camera's histogram), and then you can work on the shadow detail in post processing.

Good understanding of histograms here: http://www.luminous-landscape.com/tutorials/understanding-series/understanding-histograms.shtml

Kym
11-05-2010, 10:38am
ECFTAYDNTFAIP
Expose Correctly First Time And You Dont Need To Fart Around In Post

Agreed, but the discussion is about HOW to get the 'Right' exposure.

kiwi
11-05-2010, 10:43am
I think the best tool in my Nikon Arsenal is a) blinkies on playback on the LCD, and b) EV comp

Chimp and adjust to only have the "blinkies" where you need them while maintaining good range on the histogram

swifty
11-05-2010, 12:30pm
I think expose however u like just as long as u know what u're doing and your results reflects ur intentions.
Guides such as ETTR are there to help u optimise the captured data but it has no knowledge of what the scene is or how u intend it to look. It would be quite pointless to ETTR for example if u're photographing the moody atmosphere of a dimly lit jazz club. U may end up having to comprise one or more of ur exposure variables to ETTR only to have to darken everything down pp anyways.
Similarly if there are very bright spots of light eg. Sun, bulbs, specular reflection off metalic objects in the frame, u may have to compromise heavily in other exposure variables just to save a few highlights - quite pointless IMO.
I think as long as u understand u've lost irretrievable data in blown highlights, u can decide whether that matters in your picture.
As for HDR, I have to say I'm not a fan (yet) but the jury is still out. I still cringe at almost every obvious HDR shots I see. I'm undecided about the less obvious ones and I'm sure there're a few very well tone-mapped ones which I thought wasn't hdr which I've liked.
I like GND filter results far more but their application are generally quite limited.
In short optimse ur exposure for what u want to do with the image and don't be limited by rules and what ppl deem 'correct'.

Adrian Fischer
11-05-2010, 12:50pm
blinkies for me also.

gcflora
11-05-2010, 1:37pm
You can clip the shadows as well as highlights, meaning they're not recoverable either. I never see that mentioned though so maybe I am just weird

glenwood
11-05-2010, 3:26pm
When some one talk about histogram they do not say what setting we should me using in Camera.

histogram represent jpg even if we are shooting in RAW and will be effected by the setting of camera.

arnica
11-05-2010, 3:38pm
How do we enable to blinkies? My LCD never shows any blinking bright sections on my photos ...

Kym
11-05-2010, 3:42pm
When some one talk about histogram they do not say what setting we should me using in Camera.
histogram represent jpg even if we are shooting in RAW and will be effected by the setting of camera.

It won't matter the the histogram is on a SCALE of 0-255. Even if your sensor is 14bits.
2^0 -1 (0) -> 0 and 2^14 - 1 (16,383) -> 255

The resolution of the camera LCD is even less.
So as a simple graphic representing light on the sensor it works regardless of raw/JPEG settings.

kiwi
11-05-2010, 4:20pm
You can clip the shadows as well as highlights, meaning they're not recoverable either. I never see that mentioned though so maybe I am just weird

I don't thing you weird at all, too black is not good either


Sent from my iPhone using Tapatalk

James T
11-05-2010, 4:21pm
It won't matter the the histogram is on a SCALE of 0-255. Even if your sensor is 14bits.
2^0 -1 (0) -> 0 and 2^14 - 1 (16,383) -> 255

The resolution of the camera LCD is even less.
So as a simple graphic representing light on the sensor it works regardless of raw/JPEG settings.

It works off the processed JPEG though doesn't it? ie it doesn't work by measuring the light that hits the sensor. Meaning it takes into accounts contrast settings, etc (which affect the levels obviously).

Not something I've ever really looked into though, as it's of very little consequence in the real world.

kiwi
11-05-2010, 4:21pm
How do we enable to blinkies? My LCD never shows any blinking bright sections on my photos ...

Depends on your camera I suspect, I'm nikon land, at least on the models I'm familiar with it's a playback option you can set


Sent from my iPhone using Tapatalk

farmer_rob
11-05-2010, 4:29pm
ECFTAYDNTFAIP

Expose Correctly First Time And You Dont Need To Fart Around In Post

How long in the computer industry and you still can't get it to a TLA?

Agree with the sentiment though. (And blinkies are your friend!)

(ECHO.... Expose correctly - Histograms OK.)

swifty
11-05-2010, 4:59pm
It works off the processed JPEG though doesn't it? ie it doesn't work by measuring the light that hits the sensor. Meaning it takes into accounts contrast settings, etc (which affect the levels obviously).

Not something I've ever really looked into though, as it's of very little consequence in the real world.

yep...correct. To get a more accurate representation of ur RAW file, try uniwb.

etherial
11-05-2010, 6:11pm
Blinkies and histogram on your instant review screen are a must IMO.

James T
12-05-2010, 10:31am
FWIW, I usual start the old fashioned way, ie I use my eyes.

Then maybe have a quick check on the back of the camera for the first shot in each location. Too lazy to be worrying about metering all the time.

Kym
12-05-2010, 11:32am
Technique.... I found this on Flickr in Pentax discussion


By the way, how do you expose to the right?
I donĀ“t like the trial/error system, because sometimes there is no time to do it.

After lots of samples, I've adopted the next procedure with my K20D:

1) Set the metering mode in SPOT.
2) Set the exposure mode in M
3) Set exposure compensation to +3 Ev (in steps of 1/2 EV, 1/3 can't reach +3EV).
4) Point the centre of the viewfinder to the brightest light zone in the scene that I want detailed.
5) Press the GREEN BUTTON, to save the exposure of the brightest light +3EV.
6) Then rea-im what I want , and then shoot.

As you can see, the hysto is completely to the right, without clip lights.

If you save this setting in the USER option, you only have to set it in SPOT, USER, point the brightest light, re-aim, and shoot.
Better than trial/error 2 or 3 times...

Has anybody tried this before?

arnica
12-05-2010, 11:40am
Depends on your camera I suspect, I'm nikon land, at least on the models I'm familiar with it's a playback option you can set


Sent from my iPhone using Tapatalk

Or maybe it's just that all my photos are "perfectly exposed" ...LOL!!!


Ok, I'll have a play with the menus tonight ..

Darvidanoar
12-05-2010, 11:41am
I think the best tool in my Nikon Arsenal is a) blinkies on playback on the LCD, and b) EV comp

Chimp and adjust to only have the "blinkies" where you need them while maintaining good range on the histogram

Absolutely, I'm always checking the blinkies.